Anna University Regulation 2013 Information Technology (IT) GE6152 EG Important Questions for all 5 units are provided below. Download link for IT 1st SEM GE6152 Engineering Graphics Answer Key is listed down for students to make perfect utilization and score maximum marks with our study materials.

UNIT 5

1. A hexagonal pyramid of base side 30mm and height 60mm rests on its base on HP with two of its base edges perpendicular to VP. It is cut by a plane perpendicular to VP and inclined at 25° to HP, meeting the axis at a point 25mm above the base of the pyramid. Draw the isometric projection of the truncated pyramid.

2. A cylinder of base diameter 40mm and height 60mm rests on its base on HP. It is cut by a plane perpendicular to VP and inclined at 45° to HP. The cutting plane meets the axis at a distance of 15mm from the top surface. Draw the isometric view of the truncated cylinder.

3. A cylinder of base diameter 50mm and height 60mm rests on its base on HP. It is cut by a plane perpendicular to VP and inclined at 50° to HP. The cutting plane meets the axis at a distance of 15mm from the top surface. Draw the isometric projection of the truncated cylinder.

4. A hexagonal prism of base side 30mm and axis 60mm is resting on HP on one of its bases with two of the vertical faces perpendicular to VP. It is cut by a plane inclined at 50° to HP and perpendicular to VP passing the axis at a distance of 12mm from the top surface. Draw the isometric projection of the truncated prism.

5. A pentagonal pyramid of base 30mm and height 65mm stands with its base on HP. An edge of the base is parallel to VP and nearer to it. A horizontal section plane cuts the pyramid and passes through a point on the axis at a distance of 25mm from the apex. Draw the isometric view of the frustum of the pyramid.

6. A cone of base diameter 50mm and height 70mm stands on HP with its base. It is cut by a cutting plane perpendicular to VP and inclined at 30˚ to HP cutting the axis of the cone at a height of 40mm from its base. Draw the isometric view of the remaining part of the cone.

7. A pentagonal prism of base side 30mm, axis 60mm is resting on its base on HP with one of its base edges perpendicular to VP. It is cut by a plane perpendicular to VP, inclined 55º to HP and cut the axis at a distance of 35mm from the base. Draw the isometric projection of the truncated prism.

8. A sphere of radius 18mm is placed centrally over a hexagonal slab of side 24mm and thickness 25mm. Draw the isometric view of the combined solid.

9. The frustum of a pentagonal pyramid with base side 30mm and top surface of 15mm side has a height of 40mm. draw its isometric view.

10. A rectangular pyramid of sides 30mm x 20mm and height 35mm rests with its base on ground such that one of the longer edges is parallel to picture plane and 30mm behind it. The station point is 50mm in front of the picture plane, 30mm to the left of the axis of the pyramid and 50mm above the ground. Draw the perspective view of the pyramid.

11. A square pyramid of base side 50mm and height 75mm rests with its base on ground such that the nearest edge of the base is parallel to picture plane and 30mm behind it. The station point is 70mm in front of the picture plane, 60mm to the right of the axis of the pyramid and 50mm above the ground. Draw the perspective view of the pyramid.

12. A cube of 35mm edge lies with a face on the ground and an edge on the picture plane. All the vertical faces are equally inclined to picture plane. The station point is 80mm in front of the PP and 60mm above the ground. The edge of the cube in contact with the picture plane is situated 10mm to the right of the station point. Draw the perspective projection of the cube.

13. A cube of 30mm edge lies with a face on the ground and two vertical faces perpendicular to picture plane. The front face of the cube is 10mm in front of picture plane. The station point is 60mm in front of the PP and 60mm above the ground. The nearest edge of the cube is 20mm to the right of the station point. Draw the perspective projection of the cube.

14. A frustum of a square pyramid of base edge 30mm and top edge 20mm. The height of the frustum is 35mm. It rests on its base on the ground with the base edges equally inclined to picture plane. The axis of the frustum is 30mm to the right of the station point. The station point is 55mm in front of PP and 50mm above GP. The nearest base corner is 10mm behind picture plane. Draw the perspective projection of the frustum.

15. A square pyramid of base 30mm, axis height 45mm rests with its base on GP. One of the base edges is parallel to PP and 20mm behind it. The station point S is 60mm above ground plane, 70mm in front of picture plane and lies in the central plane which is 40mm to the right of the axis of the pyramid. Draw the perspective projection of the square pyramid.

If you require any other notes/study materials, you can comment in the below section.

Search Terms

Anna University 1st SEM IT EG Important Questions