Anna University Regulation 2013 Information Technology (IT) GE6152 EG Question Papers for all 5 units are provided below. Download link for IT 1st SEM GE6152 Engineering Graphics Previous Year Question Papers are listed down for students to make perfect utilization and score maximum marks with our study materials.

Anna University Regulation 2013 Information Technology (IT) 1st SEM GE6152 EG -Engineering Graphics Syllabus
GE6152                                                            ENGINEERING GRAPHICS                                                                  L T P C   2 0 3 4
OBJECTIVES:
 To develop in students, graphic skills for communication of concepts, ideas and design of
Engineering products
 To expose them to existing national standards related to technical drawings.
CONCEPTS AND CONVENTIONS (Not for Examination)
Importance of graphics in engineering applications – Use of drafting instruments – BIS
conventions and specifications – Size, layout and folding of drawing sheets – Lettering and
dimensioning.
UNIT I PLANE CURVES AND FREE HAND SKETCHING 5+9
Basic Geometrical constructions, Curves used in engineering practices: Conics – Construction of
ellipse, parabola and hyperbola by eccentricity method – Construction of cycloid – construction of
involutes of square and circle – Drawing of tangents and normal to the above curves, Scales:
Construction of Diagonal and Vernier scales.
Visualization concepts and Free Hand sketching: Visualization principles –Representation of Three
Dimensional objects – Layout of views- Free hand sketching of multiple views from pictorial views of
objects
UNIT II PROJECTION OF POINTS, LINES AND PLANE SURFACES 5+ 9
Orthographic projection- principles-Principal planes-First angle projection-projection of points.
Projection of straight lines (only First angle projections) inclined to both the principal planes –
Determination of true lengths and true inclinations by rotating line method and traces Projection of
planes (polygonal and circular surfaces) inclined to both the principal planes by rotating object
method.
UNIT III PROJECTION OF SOLIDS 5 + 9
Projection of simple solids like prisms, pyramids, cylinder, cone and truncated solids when the axis is
inclined to one of the principal planes by rotating object method and auxiliary plane method.
UNIT IV PROJECTION OF SECTIONED SOLIDS AND DEVELOPMENT OF
SURFACES 5+9
Sectioning of above solids in simple vertical position when the cutting plane is inclined to the one of
the principal planes and perpendicular to the other – obtaining true shape of section. Development of
lateral surfaces of simple and sectioned solids – Prisms, pyramids cylinders and cones. Development of
lateral surfaces of solids with cut-outs and holes
UNIT V ISOMETRIC AND PERSPECTIVE PROJECTIONS 6 + 9
Principles of isometric projection – isometric scale –Isometric projections of simple solids and
truncated solids – Prisms, pyramids, cylinders, cones- combination of two solid objects in simple
vertical positions and miscellaneous problems. Perspective projection of simple solids-Prisms,
pyramids and cylinders by visual ray method .
COMPUTER AIDED DRAFTING (Demonstration Only) 3
Introduction to drafting packages and demonstration of their use. TOTAL:75 PERIODS
OUTCOMES:
On Completion of the course the student will be able to:
 Perform free hand sketching of basic geometrical constructions and multiple views of
objects.
 Do orthographic projection of lines and plane surfaces.
 Draw projections and solids and development of surfaces.
 Prepare isometric and perspective sections of simple solids.
 Demonstrate computer aided drafting.
TEXT BOOK:
1. Bhatt N.D. and Panchal V.M., “Engineering Drawing”, Charotar Publishing House, 50th
Edition, 2010.
REFERENCES:
1. Gopalakrishna K.R., “Engineering Drawing” (Vol. I&II combined), Subhas Stores, Bangalore, 2007.
2. Luzzader, Warren.J. and Duff,John M., “Fundamentals of Engineering Drawing with an
introduction to Interactive Computer Graphics for Design and Production, Eastern Economy
Edition, Prentice Hall of India Pvt. Ltd, New Delhi, 2005.
3. Shah M.B., and Rana B.C., “Engineering Drawing”, Pearson, 2nd Edition, 2009.
4. Venugopal K. and Prabhu Raja V., “Engineering Graphics”, New Age
International (P) Limited, 2008.
5. Natrajan K.V., “A text book of Engineering Graphics”, Dhanalakshmi
Publishers, Chennai, 2009.
6. Basant Agarwal and Agarwal C.M., “Engineering Drawing”, Tata McGraw Hill Publishing Company
Limited, New Delhi, 2008.

Publication of Bureau of Indian Standards:
1. IS 10711 – 2001: Technical products Documentation – Size and lay out of drawing
sheets.
2. IS 9609 (Parts 0 & 1) – 2001: Technical products Documentation – Lettering.
3. IS 10714 (Part 20) – 2001 & SP 46 – 2003: Lines for technical drawings.
4. IS 11669 – 1986 & SP 46 – 2003: Dimensioning of Technical Drawings.
5. IS 15021 (Parts 1 to 4) – 2001: Technical drawings – Projection Methods.
Special points applicable to University Examinations on Engineering Graphics:
1 . There will be five questions, each of either or type covering all
units of the syllabus.
2. All questions will carry equal marks of 20 each making a total of 100.
3. The answer paper shall consist of drawing sheets of A3 size only. The
students will be permitted to use appropriate scale to fit solution within A3 size.
4. The examination will be conducted in appropriate sessions on the same day
If you require any other notes/study materials, you can comment in the below section.